Sản phẩm

ELASTIC PUTTY MATERIAL PRO-PUTEC

Product code: PRO-PUTEC

Contact information:

  • IPRO JOINT STOCK COMPANY
  • Office: No.9 Alley 61 Nguyen Viet Xuan - Thanh Xuan - Hanoi - Vietnam
  • Factory: Sai Son, Quoc Oai, Ha Noi
  • Telephone: 024.66.595.818
  • Hotline: 090.494.9779
  • Email: info@iprovietnam.com
  • Website: www.iprovietnam.com

Product detail

DESCRIPTION

Elastic putty material PRO-PUTEC is manufactured from Polyme and additive.

APPLICATION

  • PRO-PUTEC is high elastic and executed to bonding elastic joint
  • In addition, PRO-PUTEC is also waterproof as other waterproofing material.

ADVANTAGES

  • PRO-PUTEC is very high elastic, capable of covering 2 mm cracks, and high cracking resistance.
  • PRO-PUTEC is one component product so it’s easy to use
  • It does not contain unsafe substances.

SPECIFICATION

Items Unit Value Testing method
Elongation, not less than % 50 ASTM D412-2006
Adhesive strength, not less than MPa 1,0 TCVN 3121-12:2003

USAGE

PRO-PUTEC is executed following this process:

Surface preparation

  • Clean surface by using sandpaper or iron brush … Clean the dust and dirty on the surface
  • Avoid surface get dirty of such as dust, grease, other materials …
  • To utilize the high adhesion of PRO – PUTEC, the plaster layer should have a compressive strength of not less than 5 MPa

Preparing PRO-PUTEC

  • PRO-PUTEC is packaged in a 20 kg bucket. Estimate PRO-PUTEC volume to execute each time. PRO-PUTEC should not be exposed in the air for more than 5 hours, which will reduce plasticity. The remaining PRO-PUTEC should be left in the bucket and tight lid.
  • Blend carefully before use.

Executting PRO-PUTEC

  • Coat the latex primer to increase adhesion on all surfaces in contact with putty. A 20kg bucket of PRO-PUTEC includes 2 liters of latex primer.
  • After coating primer from 01 to 10 hours, execute PRO-PUTEC layer.
  • PRO-PUTEC should be executed 2 layers in 2 times. The first one is executed to cover the surface. The second one is executed after nearly dry first layer.  The thickness of each layer should be no more than 1.2mm and the total thickness of two layers should be no more than 2.5mm.
  • The weight of unit volume of PRO-PUTEC is about 1.5 ± 0.1kg/liter. Each one square metter surface with 1mm thickness needs to be executed with 1.4 – 1.5 kg of PRO-PUTEC, not counting the one sticked to the tools or unused.
  • PRO-PUTEC has very high adhesive ability so the tools need to be cleaned immediately after the execution.

STORAGE

PROMO-E is stored at temperatures between 5 and 40 ° C. The expiry date is before 6 months from manufaturing date in unopen condition. Using PROMO-E before 1 month after the  lid is opened

TECHNICAL SUPPORT

IPRO Joint Stock Company provide free 24/7 technical support. For more information, please contact us directly.