NON SHRINKAGE GROUT PROMO-F
Contact information:
- IPRO JOINT STOCK COMPANY
- Office: No.9 Alley 61 Nguyen Viet Xuan - Thanh Xuan - Hanoi - Vietnam
- Factory: Sai Son, Quoc Oai, Ha Noi
- Telephone: 024.66.595.818
- Hotline: 090.494.9779
- Email: info@iprovietnam.com
- Website: www.iprovietnam.com
Product detail
DESCRIPTION
PROMO-F is a ready-mixed dry mortar. When mixing PROMO-F with water in the recommended ratio, the mixture will have high flowability, self-filling, no shrinkage and high compressive strength.
Products meet the requirements in TCVN 9204: 2012.
APPLICATION
Machine foundations
– Rails beds
– Columns in precast construction
– Bridge bearings
– High strength repair
– Cavities
– Gap
– Repair the mortar and concrete floor
ADVANTAGES
Ability to self-fill and leveling well
No shrinkage of volume.
Volume expanding in the limit allow to create extra stresses to tightly tighten in the structure.
Cured mortar for high strength.
Contains no chlorine, sulfate ions, etc.
Non-toxic.
Easy to use.
SPECIFICATIONS
| PRODUCT | PROMO-F60 | PROMO-F80 |
| Flow of mixture, mm, not less than | 200 | 200 |
| Bledding, % | 0 | 0 |
| Expension after 3h, % | 0¸3 | 0¸3 |
| Compressive strength, not less than, MPa
3 day 7 day 28 day |
40 55 60 |
50 70 80 |
USER MANUAL
Clean the surface, absorb water, remove all grease and other contaminants before application
PROMO-F is usually mixed with water at a rate of 12-14%.
To make the homogeneous grout with high flowability, the mortar should be mixed with a mixer.
In order to avoid crack, curing the mortar in 3 days after application.
Need from 1900 to 1950 kg of product to make 1m3 fresh mortar.
PACKING, STORAGE
The product should be used before 06 months from the date of manufacture.
Store in a cool, dry place, covered.
TECHNICAL ASSISTANCE
IPRO JOINT STOCK COMPANY is committed to providing free 24/7 technical support and advice to customers.
